LMW ONE
The LM-ONE is a highly efficient horizontal slurry pump, ideal for heavy duty applications. This single stage centrifugal pump can come with a wide range of different impeller options, including an open impeller, non-clog impeller, with either 2, 3, 4, and 5 vane options.
There is one frame for two different oversized bearing cartridges, which are designed with a large diameter shaft and short impeller overhang for minimised deflection and a long bearing life. This acts as the base for the two different type options of the LM-ONE pump. The first is a wear resistant pump, made from hard metal; the second type is a pump with rubber coated parts.
Capacity up to 5.400 m3/h
Total head up to 118 m.w.c.
Pressure up to 16 bar max
Working temperature from - 30° up to 95° C
One frame for two different, oversized bearing cartridges, which are designed with a large diameter shaft and short impeller overhang for minimized deflection and a long bearing life. This will be the base for two different pumps of LM type ONE. A) a wear resist pump out of hard metal – and b) a pump with rubber coated parts.
Three different sealing devices are available, depending on the application.
DS – Dynamic shaft seal seals with a second impeller. Therefore the pump is without a seal during operation. During idleness a soft packing seals against leakage. Influent pressure may not be higher than 2.5 bar and a motor speed of 1000 rpm has to be assured.
P1 – Conventional soft packing seals with a hardened sleeve. Optional is an additional lubricating unit with 3 / 6/ 12 month interval available against extra charge.
M6 – Special mechanical seal for slurry pumps which is nearly maintenance-free
LMW ONE