LMS SPR

Details

Self priming, degasing, horizontal centrifugal pump

 

Capacity up to 1.800 m3/h

Total head up to 70 m.w.c.

Pressure up to 16 bar max.

Working temperature from – 30° up to 85° C

 

Problem

In many production processes, there is often some proportion of air and/or gas in the liquids to be pumped.

The reasons for this can be, for example:

• The special property of the liquid (e.g. grated potatoes, pulps, etc.)
• Intentional addition of gas and/or air into certain processes to achieve defined results.
• Conveyance of liquids that did not have enough time for degassing because of the production process
• For small containers with insufficient height level, air can get into the pump as a result from the formation of whirls, which are generated by the suction of the pump.
• For level-regulated liquid conditions in containers with agitators, air can get into the liquid if there is insufficient covering of the agitator blades.

 

Conventional centrifugal pumps, which are faced with a high proportion of air and/or gas, run unsteadily and do not generate a stable flow rate. Owing to the different physical properties of gases and liquids, gas is accumulated in front of the impeller (item 230) and results – depending on the size of the gas bubble formed on the suction side – in unstable pumping levels or even in the complete stop of the pump feeding.

 

Solution using SRP Pump

The special vacuum impeller (item 231) integrated into the SPR pump sucks the air/liquid mixture through degassing bores which are located in the upstream conveyor impeller (item 230) and helps there to separate air and liquid. The residual air/liquid mixture, which has been separated by this process, can then be recycled into the process on the suction side, e.g. using existing liquid containers, through bypass lines, which are mounted on the pump housing of the vacuum impeller.

Image Gallery